Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support


8000-409b with 9110-040b

tonygeno, muokattu 5 Vuodet sitten.

8000-409b with 9110-040b

Youngling Viestejä: 18 Liittymispäivä: 1.1.2016 Viimeisimmät viestit
Can I use the M040 mounting plate with the 8000-409b adjustable stand?

The 409b comes with a 3/8 inch hole in the mounting plate along with a nut but I don't know if it will work with the 409b.
ilkka-rissanen, muokattu 5 Vuodet sitten.

Re: 8000-409b with 9110-040b

Yoda Viestejä: 2564 Liittymispäivä: 23.3.2009 Viimeisimmät viestit
Yes, they both have 3/8" connection.