Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Keskusteluryhmät

RCA cable

sijk, muokattu 5 Vuodet sitten.

RCA cable

Youngling Viestejä: 3 Liittymispäivä: 16.1.2017 Viimeisimmät viestit
I have microphone cable consisting of two conductors and a shield (CMK 222). When making a RCA to RCA cable, what should I do with the extra conductor? Combine conductors as a single signal or ground it somehow? Or would there be any benefit making a RCA to XLR cable instead (with the cold signal grounded as advised)? My source has only unbalanced output. The speakers would be G series, maybe G Three.
ilkka-rissanen, muokattu 5 Vuodet sitten.

Re: RCA cable

Yoda Viestejä: 2564 Liittymispäivä: 23.3.2009 Viimeisimmät viestit
http://www.genelec.com/electronics-and-cabling

Please see: I have unbalanced outputs - RCA or 1/4" Mono Jack - on my equipment. How do I connect my monitors?
sijk, muokattu 5 Vuodet sitten.

Re: RCA cable

Youngling Viestejä: 3 Liittymispäivä: 16.1.2017 Viimeisimmät viestit
Thank you. How about the first question about making a RCA to RCA cable with similar 2-core cable?
ilkka-rissanen, muokattu 5 Vuodet sitten.

Re: RCA cable

Yoda Viestejä: 2564 Liittymispäivä: 23.3.2009 Viimeisimmät viestit
Just look at the first example. It is exactly like that but you just connect RCA connectors to both ends.