Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Keskusteluryhmät

Genelec Z8050-408 with 8351?

manutal, muokattu 5 Vuodet sitten.

Genelec Z8050-408 with 8351?

Jedi Knight Viestejä: 180 Liittymispäivä: 25.4.2014 Viimeisimmät viestit
Does the Genelec Z8050-408 work with 8351 monitors, I see that the sizes a pretty much the same except the width is different by 1mm.. In my opinion it should fit..
ilkka-rissanen, muokattu 5 Vuodet sitten.

Re: Genelec Z8050-408 with 8351?

Yoda Viestejä: 2564 Liittymispäivä: 23.3.2009 Viimeisimmät viestit
Hi,

It is a perfect match as 8351 uses the same IsoPod as 8050.