Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Keskusteluryhmät

Genelec 8010a

nani, muokattu 5 Vuodet sitten.

Genelec 8010a

Youngling Viestejä: 6 Liittymispäivä: 6.5.2016 Viimeisimmät viestit
Hello I was wondering if its normal that my Monitors turn on as soon as I switch on my Voltage regulator? Is that the ISS Function ?
ilkka-rissanen, muokattu 5 Vuodet sitten.

Re: Genelec 8010a

Yoda Viestejä: 2564 Liittymispäivä: 23.3.2009 Viimeisimmät viestit
Hi,

Yes it is typical as the ISS circuit also activates if there is a sudden change in the mains voltage. No need to worry about it.
nani, muokattu 5 Vuodet sitten.

Re: Genelec 8010a

Youngling Viestejä: 6 Liittymispäivä: 6.5.2016 Viimeisimmät viestit
& Iss works with audio signal as well? or only with electrical signals ? because i've never seen my monitors go on standby mode....
ilkka-rissanen, muokattu 5 Vuodet sitten.

Re: Genelec 8010a

Yoda Viestejä: 2564 Liittymispäivä: 23.3.2009 Viimeisimmät viestit
ISS activates when it detects audio signal but sometimes a strong interference in the electrical signal can trigger it too. You should test and unplug the signal cables from the monitors. If they now go to standby mode, you know there is lots on noise in the audio signal which keeps them awake.