Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Keskusteluryhmät

Mystery distortion issue

jivemofo, muokattu 7 Vuodet sitten.

Mystery distortion issue

Youngling Viestejä: 12 Liittymispäivä: 9.3.2014 Viimeisimmät viestit
I've got the 5040A Subwoofer with a pair of 6010A Loudspeakers. I've got my laptop going to one input and a turntable going through a mixer in another input. My problem seems to have started when I started using my new Rane MP2014 mixer. With both inputs in I'm getting this weird crackling distortion coming through the speakers. If I unplug one or the other there's no distortion at all.

Does anyone have any ideas on why this might be happening? Someone suggested it may be because the mixer is XLR to RCA and that getting an audio interface like a Lexicon I042 should solve the problem. Does that seem like a reasonable idea?

Thank you in advance!
Tim
ilkka-rissanen, muokattu 7 Vuodet sitten.

Re: Mystery distortion issue

Yoda Viestejä: 2564 Liittymispäivä: 23.3.2009 Viimeisimmät viestit
Hi Tim,

Could you be more specific, which inputs are you using? Are you using the subwoofer's volume control to adjust the system volume?

In some cases the output voltage of the mixer is too high and it causes clipping within the subwoofer's electronics.
jivemofo, muokattu 7 Vuodet sitten.

Re: Mystery distortion issue

Youngling Viestejä: 12 Liittymispäivä: 9.3.2014 Viimeisimmät viestit
Sure. I'm using 3.5mm - 3.5mm into the Front Stereo In for my laptop and the Front L and R for my turntable via Rane mixer.

The output is the Front L and R also...
ilkka-rissanen, muokattu 7 Vuodet sitten.

Re: Mystery distortion issue

Yoda Viestejä: 2564 Liittymispäivä: 23.3.2009 Viimeisimmät viestit
Ok, but are you using the subwoofer's volume controller at all (plugged to another 3.5mm jack)?
jivemofo, muokattu 7 Vuodet sitten.

Re: Mystery distortion issue

Youngling Viestejä: 12 Liittymispäivä: 9.3.2014 Viimeisimmät viestit
No...I don't use that. Nothing is plugged in there.
jivemofo, muokattu 7 Vuodet sitten.

Re: Mystery distortion issue

Youngling Viestejä: 12 Liittymispäivä: 9.3.2014 Viimeisimmät viestit
Also, I've replaced and upgraded all cables. The noise sounds to me like digital gurgling...for what that's worth :)

And it persists even if the mixer is turned off and my laptop is muted.
ilkka-rissanen, muokattu 7 Vuodet sitten.

Re: Mystery distortion issue

Yoda Viestejä: 2564 Liittymispäivä: 23.3.2009 Viimeisimmät viestit
Could you possibly record a short video clip of the sound? Have you tried unplugging the laptop charger from the mains? Sometimes it can cause this type of noise.
jivemofo, muokattu 7 Vuodet sitten.

Re: Mystery distortion issue

Youngling Viestejä: 12 Liittymispäivä: 9.3.2014 Viimeisimmät viestit
Could you possibly record a short video clip of the sound? Have you tried unplugging the laptop charger from the mains? Sometimes it can cause this type of noise.



I don't think I know how do to that..

Unplugging the charger didn't help unfortunately.
ilkka-rissanen, muokattu 7 Vuodet sitten.

Re: Mystery distortion issue

Yoda Viestejä: 2564 Liittymispäivä: 23.3.2009 Viimeisimmät viestit

I don't think I know how do to that..

Most modern mobile phones can record high quality video.
jivemofo, muokattu 7 Vuodet sitten.

Re: Mystery distortion issue

Youngling Viestejä: 12 Liittymispäivä: 9.3.2014 Viimeisimmät viestit

I don't think I know how do to that..

Most modern mobile phones can record high quality video.


OK here's a short clip
jivemofo, muokattu 7 Vuodet sitten.

Re: Mystery distortion issue

Youngling Viestejä: 12 Liittymispäivä: 9.3.2014 Viimeisimmät viestit

I don't think I know how do to that..

Most modern mobile phones can record high quality video.


OK here's a short clip




The file doesn't seem to be uploading for some reason...
ilkka-rissanen, muokattu 7 Vuodet sitten.

Re: Mystery distortion issue

Yoda Viestejä: 2564 Liittymispäivä: 23.3.2009 Viimeisimmät viestit
You need to use some external video/file service because our board software does not allow such large attachments.
jivemofo, muokattu 7 Vuodet sitten.

Re: Mystery distortion issue

Youngling Viestejä: 12 Liittymispäivä: 9.3.2014 Viimeisimmät viestit
You need to use some external video/file service because our board software does not allow such large attachments.



OK...I'm sorry for the delay. Here's that video clip uploaded to Dropbox:
https://dl.dropboxusercontent.com/u/873 ... G_9790.m4v
ilkka-rissanen, muokattu 7 Vuodet sitten.

Re: Mystery distortion issue

Yoda Viestejä: 2564 Liittymispäivä: 23.3.2009 Viimeisimmät viestit
Thank you for the video. Unfortunately the root cause for the noise is still a mystery. Combination of the laptop and the mixer just doesn't seem to work. Is it possible to unplug the other while using the other? That is the best solution I can think of now.
jivemofo, muokattu 6 Vuodet sitten.

Re: Mystery distortion issue

Youngling Viestejä: 12 Liittymispäivä: 9.3.2014 Viimeisimmät viestit
So I was talking to a pro audio friend of mine regarding this issue and he had this to say:

The Rane MP2014 support sample rates of 44.1 kHz, 48 kHz, or 96 kHz. The speakers should match sample rates (44.1k, 48k, 96k). If they can't match 48k and 96k should be used together as it is a mathematical doubling of rate.

If we can't get the results desired by adjusting clock settings on the existing equipment and using good cables this model from Mutec should take care of the issue.

http://mutec-net.com/product_mc-11-plus.php



Does this sound reasonable? Are the mixer and speakers just not compatible perhaps?
ilkka-rissanen, muokattu 6 Vuodet sitten.

Re: Mystery distortion issue

Yoda Viestejä: 2564 Liittymispäivä: 23.3.2009 Viimeisimmät viestit
Hi,

Unfortunately it does not sound reasonable at all. 6010 and 5040 are pure analog loudspeakers, they work with analog signals while the sample rate issue is a digital signal issue. If there are any sample rate issues, they happen earlier in the signal chain, before the last D/A conversion.
nim, muokattu 5 Vuodet sitten.

RE: Re: Mystery distortion issue

Youngling Viestejä: 1 Liittymispäivä: 25.9.2018 Viimeisimmät viestit

Hello,

I have observed that The Rane MP2014 rates of 44.1 kHz, 48 kHz, or 96 kHz. The speakers should match sample rates (44.1k, 48k, 96k). If they it can match 48k and 96k  it would be great. By the way, if you got any problem with canon try Canon Customer Service,