Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Keskusteluryhmät

Genelec G One bolt specification for holes in the rear

chir, muokattu 5 Vuodet sitten.

Genelec G One bolt specification for holes in the rear

Youngling Viestejä: 3 Liittymispäivä: 10.7.2016 Viimeisimmät viestit
Hello! New G One owner here, absolutely loving them, but I have a tiny problem. I cannot find the specifications for the six bolt holes behind the speaker anywhere.

What screws should I use for the two bigger and four smaller bolts in the back of the speaker?

Apologies for the simple question, but manuals, Google, and searching this forum didn't yield any answers.


For clarification, these are the holes I mean.
manutal, muokattu 5 Vuodet sitten.

Re: Genelec G One bolt specification for holes in the rear

Jedi Knight Viestejä: 180 Liittymispäivä: 25.4.2014 Viimeisimmät viestit
chir, muokattu 5 Vuodet sitten.

Re: Genelec G One bolt specification for holes in the rear

Youngling Viestejä: 3 Liittymispäivä: 10.7.2016 Viimeisimmät viestit
http://www.genelec.fi/sites/default/files/media/Studio%20monitors/Accessories/genelec_accessories_brochure.pdf

There you go :)

Hi, unfortunately that document doesn't specify what bolts are used. M7 x 0.5 ? M6 x 0.75? It seems to be a mystery and there is no documentation whatsoever on what bolts are used.

Worst comes to worst I'm going to a local hardware store and start shoving bolts in the holes until something fits. Unfortunately this risks messing up the threading bad so I would prefer to hear from the company itself, or from someone in the know.
manutal, muokattu 5 Vuodet sitten.

Re: Genelec G One bolt specification for holes in the rear

Jedi Knight Viestejä: 180 Liittymispäivä: 25.4.2014 Viimeisimmät viestit
Ah, its M6.
chir, muokattu 5 Vuodet sitten.

Re: Genelec G One bolt specification for holes in the rear

Youngling Viestejä: 3 Liittymispäivä: 10.7.2016 Viimeisimmät viestit
Ah, its M6.

Huh! I opened that PDF at work, which unfortunately requires the use of IE. The text parts specifying the screws was white on white, so I had no possibility of noticing it. Upon searching the document for "M6", I actually found the bolt specitications within the document.

Thank you for the link and thank you for the patience!
manutal, muokattu 5 Vuodet sitten.

Re: Genelec G One bolt specification for holes in the rear

Jedi Knight Viestejä: 180 Liittymispäivä: 25.4.2014 Viimeisimmät viestit
No problem mate :)