Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support


8330 + 7350 benefit of second 7350

macmarty, muokattu 6 Vuodet sitten.

8330 + 7350 benefit of second 7350

Youngling Viestejä: 8 Liittymispäivä: 9.12.2015 Viimeisimmät viestit
Hello Genelec Community,
I'm running a set of 8330 together with 1 7350 calibrated in my living room.
Really like the sound.
Now as I can get a good deal on another 7350 I'm wondering if or how the sound would benefit of this second sub?
daiyama, muokattu 6 Vuodet sitten.

Re: 8330 + 7350 benefit of second 7350

Padawan Viestejä: 73 Liittymispäivä: 4.1.2016 Viimeisimmät viestit
This highly depends on your situation in your living room and how you can position the second sub.
If it is more or less symmetrical to your already used sub it will be higher sound level "only".

If you can position the second sub more freely you have the chance, if you have "holes" in your frequency response curve (usually due to cancelation by reflections from wall or ceiling), that you can fill up these holes by positioning the second sub in a way that it helps to minimize these cancalltion effects. But you habe experiment a little bit where the best position is and as you habe a GLM sytem you can check easily the frequency response with different positioning.