Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Keskusteluryhmät

GLM / AutoCal..flat response software for Analogue speakers

mrinsatiable, muokattu 6 Vuodet sitten.

GLM / AutoCal..flat response software for Analogue speakers

Padawan Viestejä: 30 Liittymispäivä: 9.12.2009 Viimeisimmät viestit
What is the best way to adjust analogue speakers to get the flat response for home theater/music listening use?

My preamplifier/ audio video receiver has a calibration software on its end that does speaker/room calibration.

-Genelec has it's own software for calibration.
-Both require microphones but i wanted to know since i have analogue speakers.

Should I only use the software on my preamp?

Do I need to purchase Autocal or GLM to get the best out of my Genelecs? for this purpose?

Do i need to use a combination of both to get what i need?
daiyama, muokattu 6 Vuodet sitten.

Re: GLM / AutoCal..flat response software for Analogue speak

Padawan Viestejä: 73 Liittymispäivä: 4.1.2016 Viimeisimmät viestit
For the Genelec GLM Software you require the SAM speaker series from Genelec.
Therefore you have to use the calibration system from your preamp.
ilkka-rissanen, muokattu 6 Vuodet sitten.

Re: GLM / AutoCal..flat response software for Analogue speak

Yoda Viestejä: 2564 Liittymispäivä: 23.3.2009 Viimeisimmät viestit
Hi,

Genelec GLM and AutoCal work only with the Genelec DSP/SAM series monitors and subwoofers. For analog series models you need to use the dip switches or an external EQ. An acoustic measurement system such as Room EQ Wizard is advised to be used to evaluate the room acoustics before adjusting any settings.
mrinsatiable, muokattu 6 Vuodet sitten.

Re: GLM / AutoCal..flat response software for Analogue speak

Padawan Viestejä: 30 Liittymispäivä: 9.12.2009 Viimeisimmät viestit
Thanks Guys!!! Clears up a lot of confusion.