Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support


Help with 7060B/8240 set up

megatrax, muokattu 6 Vuodet sitten.

Help with 7060B/8240 set up

Youngling Viestejä: 1 Liittymispäivä: 7.2.2016 Viimeisimmät viestit
I have a 7060B with a pair of 8240's and have also purchased the GLM 2.0 System kit. Question I have is the production room I'm in is not ideal and your help would be invaluable. Just as a side note, I am a producer of a Broadcast Network in California and recently recommended and finally have purchased 15 pairs of 8240's, 3 pairs of 8040's and 11 pairs of 8010's and are very happy with them. My post here is that I set up the systems for my colleagues with no issues but this particular setup for my production studio needs your help. The space I'm in is such that I have to set up the monitor system into a corner of the room. I have Auto Cal the space quite few times and am still not 100% happy with my mix results, I still feel a lack of bass in the final mix is evident, meaning too much is generated in my small space. Could you please 1. the best way of calibrating the system via GLM to the room acoustics, I have an analogue sub and DSP mains. 2.Subwoofer placement and main speakers placement since I'm facing a corner of the room.

Thank you in advance for your help and direction.
1038, muokattu 6 Vuodet sitten.

Re: Help with 7060B/8240 set up

Jedi Master Viestejä: 340 Liittymispäivä: 6.4.2009 Viimeisimmät viestit
Can you post screen shots of your GLM calibration?

How do your mix's translate if you remove the 7060 from your system?

GLM can't help when it comes to setting the 7060 up, so you'll need to set the filters and phase manually. Do you use any room measurement software such as REW? What are your current subwoofer settings?
ilkka-rissanen, muokattu 6 Vuodet sitten.

Re: Help with 7060B/8240 set up

Yoda Viestejä: 2564 Liittymispäivä: 23.3.2009 Viimeisimmät viestit

Thank you in advance for your help and direction.

Hi there,

I will send you a PM and put in direct contact with our USA subsidiary/office who could offer you local/on-site help with the GLM calibration.