Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Keskusteluryhmät

AIW26 and 5041 sub

frankleslie, muokattu 6 Vuodet sitten.

AIW26 and 5041 sub

Youngling Viestejä: 2 Liittymispäivä: 29.2.2016 Viimeisimmät viestit
A colleague is in the process of purchasing 2pcs. AIW26 and he wants to use a 5041 subwoofer with these. I know that the sub is designed for the smaller in-wall speakers but he wants it anyway. What is the best way of connecting these together and is there a crossover that you recommend if this has to be used. best regards Frank
ilkka-rissanen, muokattu 6 Vuodet sitten.

Re: AIW26 and 5041 sub

Yoda Viestejä: 2564 Liittymispäivä: 23.3.2009 Viimeisimmät viestit
Hello,

for proper operation, you need to use external bass management (crossover filtering) for this combination. What type of AV receiver you will be using? The subwoofer has its own low pass filter set at 85 Hz so the high pass for the speakers should be matched with this.
frankleslie, muokattu 6 Vuodet sitten.

Re: AIW26 and 5041 sub

Youngling Viestejä: 2 Liittymispäivä: 29.2.2016 Viimeisimmät viestit
Hi and thanks for the reply.

He will be using a Cambride DAC(with XLR out) that gets its program from a SONUS multimedia system.
I have been told this product will do the job: http://mackie.com/products/sp260

Best regards Frank