Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support


TASCAM CD-RW901MKII is good AES solution or not?

meng, muokattu 6 Vuodet sitten.

TASCAM CD-RW901MKII is good AES solution or not?

Padawan Viestejä: 27 Liittymispäivä: 17.12.2015 Viimeisimmät viestit
Do you think that the TASCAM CD-RW901MKII could provide this solution?

I want to connect the AES out of 901 to Genelec 8330x2+7350 with 2.0 PCM digital signal.

There is the internal CD player.

And then, connect the DVD unbalanced coaxial RCA to 901; connect analogy RCA to 901......

Use the 901 signal selection to choose the input.

The 901 is cheaper than TASCAM DA3000.

Could you help me to confirm it? Or any advices? Thanks.
ilkka-rissanen, muokattu 6 Vuodet sitten.

Re: TASCAM CD-RW901MKII is good AES solution or not?

Yoda Viestejä: 2564 Liittymispäivä: 23.3.2009 Viimeisimmät viestit

I have no personal experience about this device but looking at the specifications, it seems to work just as you described.