Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Keskusteluryhmät

3V Line out from Chord Mojo

music4mhell, muokattu 7 Vuodet sitten.

3V Line out from Chord Mojo

Youngling Viestejä: 7 Liittymispäivä: 4.12.2015 Viimeisimmät viestit
Hello All,

I recently bought Chord MOJO DAC.

The line output of Mojo is 3V.

Is it too much for my Genelec F One sub ?

Should i use 2V Line out or 3V line out will be fine ?

Regards.
ilkka-rissanen, muokattu 7 Vuodet sitten.

Re: 3V Line out from Chord Mojo

Yoda Viestejä: 2564 Liittymispäivä: 23.3.2009 Viimeisimmät viestit
Hi,

The Chord MOJO (which is a headphone DAC) seems to have either variable or fixed (3V) output level. If you are planning to use the latter, how are you going to adjust the volume? Are you planning to use the subwoofer's remote controlled for this purpose? What is your source device?
music4mhell, muokattu 7 Vuodet sitten.

Re: 3V Line out from Chord Mojo

Youngling Viestejä: 7 Liittymispäivä: 4.12.2015 Viimeisimmät viestit
Hi,

The Chord MOJO (which is a headphone DAC) seems to have either variable or fixed (3V) output level. If you are planning to use the latter, how are you going to adjust the volume? Are you planning to use the subwoofer's remote controlled for this purpose? What is your source device?


My Source is either Chromecast Audio/My TV optical Out.
So i can control the volume from the Source & Sub.

I am just worried, whether 3V Line out can damage the speaker ?
ilkka-rissanen, muokattu 7 Vuodet sitten.

Re: 3V Line out from Chord Mojo

Yoda Viestejä: 2564 Liittymispäivä: 23.3.2009 Viimeisimmät viestit
3 volts is only the maximum output of the device. If you will adjust the volume from the source, the output level will naturally change too. 3 volts won't damage the subwoofer but it's quite high which means you need to attenuate it quite a bit at some part of the signal chain. Also notice that the Mojo will automatically reset this setting every time you boot it.
music4mhell, muokattu 7 Vuodet sitten.

Re: 3V Line out from Chord Mojo

Youngling Viestejä: 7 Liittymispäivä: 4.12.2015 Viimeisimmät viestit
3 volts is only the maximum output of the device. If you will adjust the volume from the source, the output level will naturally change too. 3 volts won't damage the subwoofer but it's quite high which means you need to attenuate it quite a bit at some part of the signal chain. Also notice that the Mojo will automatically reset this setting every time you boot it.


Thanks for the reply.
I got my answers :)