Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Keskusteluryhmät

DSP Filter In-/Decrease via Slider

geco, muokattu 7 Vuodet sitten.

DSP Filter In-/Decrease via Slider

Youngling Viestejä: 9 Liittymispäivä: 14.10.2015 Viimeisimmät viestit
Hi,
it would be nice to have a percentage slider in the GLM2.0 Gui, enabling decreasing of the dsp filter result dB in total proportionally. Since after measurement I want the result something like... 15% less or so.... to calc and type everything manually in each filter is very time consuming in finding the personal sweet spot =)
Thx... that would be nice :idea:

Best wishes
Geco
ilkka-rissanen, muokattu 7 Vuodet sitten.

Re: DSP Filter In-/Decrease via Slider

Yoda Viestejä: 2564 Liittymispäivä: 23.3.2009 Viimeisimmät viestit
Thank you for your request. I believe your goal can be achieved by another means. If it is for example bass that you want more, you can add extra shelving filter at ~200 Hz and attenuate everything above it by -1 dB, -2 dB etc. That way you won't make the frequency response any less flatter but apply a slight tilt towards the high frequencies which typically pleases many users.
geco, muokattu 7 Vuodet sitten.

Re: DSP Filter In-/Decrease via Slider

Youngling Viestejä: 9 Liittymispäivä: 14.10.2015 Viimeisimmät viestit
Thx for your hint! I´ll test it out. It makes sense... nevertheless, a 'mix-knob/slider' would be pleasant O:-)

Btw: I am on dual boot IMac... I measured on win8.1 and typed in the number from the mic...saved the group...
booted to osx yosemite and opened this group to GLM2.0 osx application (didnt typed the mic number in yet)... ==> The red and green frequency lines aren´t showing... only the blue one (of course, cause it´s the one of the filters). Could be a bug or is due to the fact, that I didnt typed the mic number in yet?! ...