Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Keskusteluryhmät

GLM2 issue.

raindog, muokattu 7 Vuodet sitten.

GLM2 issue.

Padawan Viestejä: 33 Liittymispäivä: 19.7.2013 Viimeisimmät viestit
Dear Team
i have a problem using the pink noise generator in the acoustic all edit mode, i think lot of frequency in the top and in the low are lost... or not...
thank you.
ilkka-rissanen, muokattu 7 Vuodet sitten.

Re: GLM2 issue.

Yoda Viestejä: 2564 Liittymispäivä: 23.3.2009 Viimeisimmät viestit
Hello,

I am sorry but I don't understand your question? Can you please clarify?
raindog, muokattu 7 Vuodet sitten.

Re: GLM2 issue.

Padawan Viestejä: 33 Liittymispäivä: 19.7.2013 Viimeisimmät viestit
Hi Ikka
when i start the pink generator in the GLM i can heard only frequence between 200hz and 5000hz, i misured it with another pc and mic. Can you please do some test on your own?
Thank you.
ilkka-rissanen, muokattu 7 Vuodet sitten.

Re: GLM2 issue.

Yoda Viestejä: 2564 Liittymispäivä: 23.3.2009 Viimeisimmät viestit
Ok, now I understand. The pink noise is band filtered by design so your measurements are correct. It is not meant for actual audio measurement purposes but as a identification noise only. You should use some other device or software to produce full band pink noise signal should you need it.