Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Keskusteluryhmät

GLM 2.0 Save settings to 8351's

avantmidi, muokattu 8 Vuodet sitten.

GLM 2.0 Save settings to 8351's

Youngling Viestejä: 15 Liittymispäivä: 28.5.2015 Viimeisimmät viestit
Hi Ikka,

I love my 8351's with GLM 2.0 kit. in one word: WOW!:)
One question. It seems when I save my setting at current level to the 8351's it does not store this setting in the monitors although the software says the setting are successfully saved to the monitors in the popup. When I unplug the USB from the GLM hub the monitors remain playing the correct level en SAM config....but if the 8351's are powered down the settings seems to be lost and factory setting are restored when powering.

Maybe I am doing something wrong?

OSX Yosemite, Macbook PRO, i7 Quad core, early 2011
ilkka-rissanen, muokattu 8 Vuodet sitten.

Re: GLM 2.0 Save settings to 8351's

Yoda Viestejä: 2564 Liittymispäivä: 23.3.2009 Viimeisimmät viestit
Hi,

Can you check that you have enabled the stored settings dip switch on both speakers? It's the leftmost dip on the second row. It should be ON/up. Save settings again after enabling it.