Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Keskusteluryhmät

1091A sub internal speaker connection polarity

sultan, muokattu 7 Vuodet sitten.

1091A sub internal speaker connection polarity

Youngling Viestejä: 2 Liittymispäivä: 5.7.2015 Viimeisimmät viestit
I had some issues with the amp / crossover unit and had to pull it out.
Unfortunately I didn't pay attention to the speaker connection polarity when I disconnected it. :roll:
There are blue and black wires and it is not obvious to me which is the positive (blue or black).
The speaker itself has a red spot marked for the positive, but either the blue or black cable running from the PCB could be the negative.
I don't want to connect it out of phase so if anyone knows, please tell me:

Which is the positive signal cable, blue or black?

Thanks.
christophe-anet, muokattu 7 Vuodet sitten.

Re: 1091A sub internal speaker connection polarity

Jedi Knight Viestejä: 188 Liittymispäivä: 23.3.2009 Viimeisimmät viestit
Hello!

Thanks for your post. All service-related questions about discontinued products should be sent to our Factory Service Center via service@genelec.com. Could you please send your message there? - Many thanks in advance.

Best regards,
sultan, muokattu 7 Vuodet sitten.

Re: 1091A sub internal speaker connection polarity

Youngling Viestejä: 2 Liittymispäivä: 5.7.2015 Viimeisimmät viestit
Ok, so I received a reply from Genelec service:

Blue is +
Black is -