Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support


M040 fault

matt-w, muokattu 7 Vuodet sitten.

M040 fault

Youngling Viestejä: 3 Liittymispäivä: 22.6.2015 Viimeisimmät viestit
I just bought 2 M040s from Thomann, and have a fault in one of the units. The TRS input socket seems very sensitive. Pushing the cable in all the way gets no sound, whereas if you pull it out slightly sound is heard and even then it's fairly difficult getting a solid sound. The faulty unit was manufactured in January 2015, the other unit which was manufactured in December 2014 is fine. Do you have any suggestions of a simple fix (have you heard of this problem before?) or should I return for a replacement? I'm based in England if that makes any difference to anything

Just to add, the cable was fine with my JBL LSR305, and I also tried the cable in the working M040 and it was fine.

Thank you for your help in advance

Kind regards
ilkka-rissanen, muokattu 7 Vuodet sitten.

Re: M040 fault

Yoda Viestejä: 2564 Liittymispäivä: 23.3.2009 Viimeisimmät viestit
Hi Matt,

I haven't heard about this sort of fault before but it looks to be related to the input connector. My recommendation is to return it for a replacement from Thomann but obviously you need to sort it out with them.