Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Keskusteluryhmät

GLM with a pair of 8330's only - without sub?

imatsig, muokattu 7 Vuodet sitten.

GLM with a pair of 8330's only - without sub?

Youngling Viestejä: 2 Liittymispäivä: 9.5.2015 Viimeisimmät viestit
I've made a tech support enquiry to Genelec, but would like to know sooner if possible.

Can anyone confirm that GLM software (and specifically GLM AutoCal) will work with only one pair of speakers and no sub please?

In the manual it says -

To set up a monitoring system you will need monitors and subwoofers,

and as far as I can see there's no mention made of using GLM with a single pair only of 8330's say, and all setup instructions refer to having a sub as well, so it would appear that GLM needs a pair of monitors and a sub to work.

Anyone know if this is correct please?

thanks
bourne, muokattu 7 Vuodet sitten.

Re: GLM with a pair of 8330's only - without sub?

Padawan Viestejä: 74 Liittymispäivä: 26.2.2014 Viimeisimmät viestit
You could always use 82xx and 12xx SAMs GML calibrated without a sub - there is no reason for a change in the 83xx-series....
Naturally, adding a sub will have some benefits :)
1038, muokattu 7 Vuodet sitten.

Re: GLM with a pair of 8330's only - without sub?

Jedi Master Viestejä: 340 Liittymispäivä: 6.4.2009 Viimeisimmät viestit
Yes i can confirm that 8320's and 8330's can be used and calibrated without the 7350 sub.
imatsig, muokattu 7 Vuodet sitten.

Re: GLM with a pair of 8330's only - without sub?

Youngling Viestejä: 2 Liittymispäivä: 9.5.2015 Viimeisimmät viestit
Great thanks for the information, I'll go ahead with 8330's to replace 8030's initially, and get the sub later. :)