Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support


7040A with M040's?

beatsyd, muokattu 8 Vuodet sitten.

7040A with M040's?

Youngling Viestejä: 10 Liittymispäivä: 4.2.2014 Viimeisimmät viestit
Just seen the press release for the 7040A's. Note that it mentions you can pair with the M030's but no reference to M040's. Just wanted to check you could add them to a pair of M040's? I have both M030 and M040 so would like a sub I can use between both systems. Thanks.
ilkka-rissanen, muokattu 8 Vuodet sitten.

Re: 7040A with M040's?

Yoda Viestejä: 2564 Liittymispäivä: 23.3.2009 Viimeisimmät viestit
Technically they both work but we don't recommend it to be used with M040's because the subwoofer can't keep up with the SPL if played at high level. If played only at low to moderate levels, then there is no problem. I would recommend our 7060B subwoofer for the M040's.