Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support


1031a woofer/bass dry rubber

christiandk, muokattu 7 Vuodet sitten.

1031a woofer/bass dry rubber

Youngling Viestejä: 1 Liittymispäivä: 26.3.2015 Viimeisimmät viestit
I recently bought 3 used 1031a Genelec monitors. The pair are a the newer model. The third which I will use as a center loudspeaker seem slightly older with wooden cabinet. Here, I have noticed that the outer rubber ring on the woofer seem somewhat "dry". There are no issues with the sound. Should I just leave the rubber or could it benefit from lubrication of some sort`?
ilkka-rissanen, muokattu 7 Vuodet sitten.

Re: 1031a woofer/bass dry rubber

Yoda Viestejä: 2564 Liittymispäivä: 23.3.2009 Viimeisimmät viestit
Hi Christian,

Rubber tends to change its colour/shine due to UV radiation. You might try some silicone based rubber treatment grease to revitalise its original colour/shine. ... VRT3U7DZPX