Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Keskusteluryhmät

Marantz / Audyssey Calibration for Genelecs

g3f2, muokattu 7 Vuodet sitten.

Marantz / Audyssey Calibration for Genelecs

Youngling Viestejä: 1 Liittymispäivä: 21.3.2015 Viimeisimmät viestit
Hei,
Anything what is needed to be considered, if calibrating
G Three / F Two combination via Marantz NR1403 head unit?

Marantz allows wired Audyssey microphone measuring set up for 5.1 configuration.
I uset it with KEF KHT2005.2 system before changing into 2*G3/F2 set.

At the moment systen is wired as 2.0 stereo:
Marantz RCA outputs > F2 XLR inputs > F2 XLR outputs > G3 XLR inputs.

Looking forward for your comments.

MK
reneb, muokattu 7 Vuodet sitten.

Re: Marantz / Audyssey Calibration for Genelecs

Youngling Viestejä: 1 Liittymispäivä: 19.12.2014 Viimeisimmät viestit
Hei,
Anything what is needed to be considered, if calibrating
G Three / F Two combination via Marantz NR1403 head unit?

Marantz allows wired Audyssey microphone measuring set up for 5.1 configuration.
I uset it with KEF KHT2005.2 system before changing into 2*G3/F2 set.

At the moment systen is wired as 2.0 stereo:
Marantz RCA outputs > F2 XLR inputs > F2 XLR outputs > G3 XLR inputs.

Looking forward for your comments.

MK


"never more!"