Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Keskusteluryhmät

8040a - had all dips on by accident - is it a problem?

ilikesound, muokattu 5 Vuodet sitten.

8040a - had all dips on by accident - is it a problem?

Youngling Viestejä: 9 Liittymispäivä: 24.2.2011 Viimeisimmät viestit
Hello,

I made a mistake and had the -6 and -4 dips simultaneously on my my Genelec 8040a and the desktop control (see picture, note it's only a mockup not the actual picture). I discovered it today while I wanted to switch them all off for room measurement - and you guess what... instead of switching them all off I switched them all on. I noticed it due to the very reduced bass response with this setting.

After that clumsiness I've set up all my dips from the 8040 fine.

But I'm interested if these above mentioned settings are a problem and if it could lead damage from the 8040 when you have more than one "switch" on (in my case also all switches...) simultaneously for the bass-roll off and/or bass tilt?


Best regards
ilkka-rissanen, muokattu 7 Vuodet sitten.

Re: 8040a - had all dips on by accident - is it a problem?

Yoda Viestejä: 2564 Liittymispäivä: 23.3.2009 Viimeisimmät viestit
Hi,

No damage was being made, don't worry at all! :)
ilikesound, muokattu 7 Vuodet sitten.

Re: 8040a - had all dips on by accident - is it a problem?

Youngling Viestejä: 9 Liittymispäivä: 24.2.2011 Viimeisimmät viestit
Thanks for the answer. It's so nice as a costumer to have such a nice and responsive forum!

Just out of interest, are the filters just combined when you have more than one on (for example the -6 and -4), or will the result just be an odd behaviour? 8-)
ilkka-rissanen, muokattu 7 Vuodet sitten.

Re: 8040a - had all dips on by accident - is it a problem?

Yoda Viestejä: 2564 Liittymispäivä: 23.3.2009 Viimeisimmät viestit
Thank you for the compliments! :)

Filters will add up but the result isn't an exact sum of individual filters. Therefore we recommend to use only one at a time.