Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Keskusteluryhmät

Suitable AES/EBU Interface 8250a

sfabs, muokattu 7 Vuodet sitten.

Suitable AES/EBU Interface 8250a

Youngling Viestejä: 4 Liittymispäivä: 25.11.2013 Viimeisimmät viestit
Hello

I have a question for other users and the support team

I am looking for a suitable audio interface. I want to use my 8250a's with their AES/EBU digital connection. I am currently using them with the analog connection.

I have a focus rite 24 DSP. It has all the inputs and outputs I need. I only require 2-4 inputs and 2-6 outputs max, really a small scale interface. But I am struggling to find an interface of that spec with aes/EBU outputs... Does anyone have any recommendations?

I was hoping to find something not too expensive as I don't need lots of ins and outs.

I do have an spdif output on the focusrite, I understand you can go from spdif to aes although there are some draw backs??
What do people think, try to configure my spdif to aes or buy a new interface, and if so, what interfaces examples are suitable for my needs?

Thanks
syndicate, muokattu 7 Vuodet sitten.

Re: Suitable AES/EBU Interface 8250a

Youngling Viestejä: 1 Liittymispäivä: 18.3.2015 Viimeisimmät viestit
***BUMP***

This is a great question. Not only because i have the same inquiry but it's great information for anyone who is looking to invest in the 82xx/83xx line of monitors.

I too found out that to get the most out of my 8250s it is best to use AES. That being said my current interface is the RME Babyface. (still unopened and in the box due to my AES concern) I can purchase the HOSA ODL-312 which will convert the spidif to AES but what are these drawbacks? Am i better off purchasing an Interface like the Fireface UCX that has AES I/O? It's a hefty price to pay but i'd rather do it properly from jump.

Are there throughput issues or numbers i should be looking into? Is it worth investing an additional $1000+ to get an AES I/O? Will the monitors performance be impacted converting spdif?

I'd love any input or suggestions as my 8250s will be arriving in the next couple weeks.

Thanks in advance!!
1038, muokattu 7 Vuodet sitten.

Re: Suitable AES/EBU Interface 8250a

Jedi Master Viestejä: 340 Liittymispäivä: 6.4.2009 Viimeisimmät viestit
This has been discussed a few times, this thread should provide some useful information.

http://www.community.genelec.com/forum/viewtopic.php?f=4&t=706