Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Keskusteluryhmät

Loud bump at swithcing on/off

strologu, muokattu 8 Vuodet sitten.

Loud bump at swithcing on/off

Youngling Viestejä: 2 Liittymispäivä: 5.12.2014 Viimeisimmät viestit
Hello,
I've recently bought a pair of 8020 and after some days of use I've noticed that one of them (just one) shows a "bump" when is switched on/off. It reminds me the behaviour of my old NAD 3020 back in the eighties, it seems the same kind of "bump".
Only one monitor is doing so, while the other is not
.
Is it normal? Should I contact distributor (speakers are one week old!).
Thanks in advance!
A.V.
ilkka-rissanen, muokattu 8 Vuodet sitten.

Re: Loud bump at swithcing on/off

Yoda Viestejä: 2564 Liittymispäivä: 23.3.2009 Viimeisimmät viestit
Hi,

Could you tell which revision (A, B or C) your units are? Typically there is a some sort of start-up sound in every active speaker, but obviously it should be relatively similar between each unit. I would suggest you to contact your local distributor/dealer for further information.
strologu, muokattu 8 Vuodet sitten.

Re: Loud bump at swithcing on/off

Youngling Viestejä: 2 Liittymispäivä: 5.12.2014 Viimeisimmät viestit
Thanks for replying. They're C revision, anyway I've contacted my distributor, it seems that the unit is damaged :(