Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Keskusteluryhmät

Genelec 8040A: frequency range at -6db?

hkr-4life, muokattu 7 Vuodet sitten.

Genelec 8040A: frequency range at -6db?

Youngling Viestejä: 6 Liittymispäivä: 7.6.2014 Viimeisimmät viestit
Hi

from the specification ive seen that the model 8040A reach the 45Hz at -3db. what frequency range at -6db?

thx
roger
ilkka-rissanen, muokattu 7 Vuodet sitten.

Re: Genelec 8040A: frequency range at -6db?

Yoda Viestejä: 2564 Liittymispäivä: 23.3.2009 Viimeisimmät viestit
Hello,

You can find the information here, it's 41 Hz.

http://www.genelec.com/products/8040b/
hkr-4life, muokattu 4 Vuodet sitten.

RE: Re: Genelec 8040A: frequency range at -6db?

Youngling Viestejä: 6 Liittymispäivä: 7.6.2014 Viimeisimmät viestit
ilkka-rissanen:
Hello,

You can find the information here, it's 41 Hz.

http://www.genelec.com/products/8040b/



Hi,

 

41 hz on the genelec 8040"A" model? the -6dB > 41Hz is referring to the input sensitivity?

As you can see, im building up my new studio and new analog hardware coming. I've set the Bass Tilt, Bass Tremble and Bass roll-off ALL to OFF and input sensitivity to -6dB. is it correct? my monitors are 60 cm far from front wall.

 

thx i advanced

PS: studio dimension: width 2,5m x deep 3,5m x height 2,9m