Pairing the M Series monitors with a 5040?

Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Keskusteluryhmät

manwood, muokattu 8 Vuodet sitten.

Pairing the M Series monitors with a 5040?

Youngling Viestejä: 4 Liittymispäivä: 9.10.2014 Viimeisimmät viestit

I'm looking to refresh my speaker setup and am considering either the M030 or M040, but I need some low end.

Can I pair either of these with the 5040?

I can't stretch to the 7050.

ilkka-rissanen, muokattu 8 Vuodet sitten.

Re: Pairing the M Series monitors with a 5040?

Yoda Viestejä: 2564 Liittymispäivä: 23.3.2009 Viimeisimmät viestit

Hi,

Unfortunately it is not recommended to pair 5040 with either of these models due to missing bass management function (crossover filters for speakers). And actually same applies to 7050. Our most affordable subwoofer models having the bass management function are the 7060 and F Two.

manwood, muokattu 8 Vuodet sitten.

Re: Pairing the M Series monitors with a 5040?

Youngling Viestejä: 4 Liittymispäivä: 9.10.2014 Viimeisimmät viestit

Ok thanks. I can't seem to find the F Two for sale in the UK.

Are they the only two options for sub bass with the M series monitors? Is there an M series sub planned?

ilkka-rissanen, muokattu 8 Vuodet sitten.

Re: Pairing the M Series monitors with a 5040?

Yoda Viestejä: 2564 Liittymispäivä: 23.3.2009 Viimeisimmät viestit

Ok thanks. I can't seem to find the F Two for sale in the UK.

Have you contacted your local distributor yet?

http://www.genelec.com/shop/distributors-network/

Are they the only two options for sub bass with the M series monitors?

F Two, 7060, 7260, 7070, 7270, 7071, 7271 and 7073 are compatible with the M series.

If you are into second-hand subs, also 5051 and 5050 are compatible.

Is there an M series sub planned?

Unfortunately I can't disclose any information about future product launches.

adriantatar, muokattu 8 Vuodet sitten.

Re: Pairing the M Series monitors with a 5040?

Padawan Viestejä: 29 Liittymispäivä: 27.5.2014 Viimeisimmät viestit

Is there an M series sub planned?

Unfortunately I can't disclose any information about future product launches.[/quote]

if will be produced a sub for M series, I hope will be used the same switches and the volume control to be able to do without screwdriver