Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Keskusteluryhmät

Alternatives to 5040?

overhere, muokattu 7 Vuodet sitten.

Alternatives to 5040?

Padawan Viestejä: 60 Liittymispäivä: 7.9.2009 Viimeisimmät viestit
I am afraid the 5040 will be a little too small for a home theater subwoofer with my 6010 setup. Yes I am aware that the speakers should be bigger too, but is it possible to use another subwoofer with the 6010's? I know the connections are different on the 7050, but there are adapters. Would this work well?

I haven't really heard the 5040 that much, just once a few years ago. People do say it isn't a good subwoofer. Not that punchy etc..

The price on the F Two is a bit too tasty for my mouth :/
ilkka-rissanen, muokattu 7 Vuodet sitten.

Re: Alternatives to 5040?

Yoda Viestejä: 2564 Liittymispäivä: 23.3.2009 Viimeisimmät viestit
Hi,

it is possible to use 7050B with adapters. Just remember to set up input sensitivity much lower than typical because 6010s have 10 dB lower input sensitivity. +4 dBu would be a good setting to start with.