Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Keskusteluryhmät

8020C Power cable fuse

sheditor, muokattu 7 Vuodet sitten.

8020C Power cable fuse

Youngling Viestejä: 2 Liittymispäivä: 13.8.2014 Viimeisimmät viestit
I have a pair of 8020C monitors which use IEC/kettle leads, as do my pair of Dell screens. I had to unplug all four units, and now am not 100% sure which IEC leads are for which - there are two with 5 amp fuses and two with 13amp fuses. What amperage fuse do the 8020Cs take? I have a feeling it is 13amp, but wanted to double check.

Thanks in advance
ilkka-rissanen, muokattu 7 Vuodet sitten.

Re: 8020C Power cable fuse

Yoda Viestejä: 2564 Liittymispäivä: 23.3.2009 Viimeisimmät viestit
Hi,

it's 13 amp.
sheditor, muokattu 7 Vuodet sitten.

Re: 8020C Power cable fuse

Youngling Viestejä: 2 Liittymispäivä: 13.8.2014 Viimeisimmät viestit
Thanks for the quick response!
fredlupin, muokattu 7 Vuodet sitten.

Re: 8020C Power cable fuse

Youngling Viestejä: 1 Liittymispäivä: 23.6.2011 Viimeisimmät viestit
I have the same kind of issue with one of my 8020a; I sent an email to the french sav (audiopole, according to the internet, so it was not obvious to find it...) No answer till last week...
I wonder if it s only the fuse, or the whole power supply that we 'd have to change, but in any case, i won t be able to wait weeks; i might have to replace it either with a 8020 cpm (is it a problem to "mix one new" gear with one older;)
to finish the work. I know we are not supposed to open the speaker by ourselves, but what could i do if there is no SAV around?
Thanks for giving your tips and advices...
ilkka-rissanen, muokattu 7 Vuodet sitten.

Re: 8020C Power cable fuse

Yoda Viestejä: 2564 Liittymispäivä: 23.3.2009 Viimeisimmät viestit
I have the same kind of issue with one of my 8020a; I sent an email to the french sav (audiopole, according to the internet, so it was not obvious to find it...) No answer till last week...
I wonder if it s only the fuse, or the whole power supply that we 'd have to change, but in any case, i won t be able to wait weeks; i might have to replace it either with a 8020 cpm (is it a problem to "mix one new" gear with one older;)
to finish the work. I know we are not supposed to open the speaker by ourselves, but what could i do if there is no SAV around?
Thanks for giving your tips and advices...

Hi,

Please contact yann.matte [at] audiopole.fr

You should get a reply quick regarding a service. It is not allowed nor recommended to open up the speaker yourself.

If you need to replace the speaker, it is no problem to mix newer revisions (B or C) with the older ones because the sound quality hasn't changed at all.