Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Keskusteluryhmät

connecting valve preamp with genelec 7050b + 8030b

bop-b-3akohe, muokattu 9 Vuodet sitten.

connecting valve preamp with genelec 7050b + 8030b

Youngling Viestejä: 4 Liittymispäivä: 11.11.2009 Viimeisimmät viestit
hello there..
I intend to connect genelec 7050b + 8030b in stereo configuration with a valve preamp just to add that extra little bit of warmness to the sound. The fact is that from the moment I added the sub the overall sound image of the system has been overwhelming.. just outstanding! I really recommend adding 7050b to partner with 8030b's. So although I have an allen & heath zed 14 console to the system, which has a decent sound to say the least, I would like to experience what the genelecs can produce with a more audiofile configuration without the console at least when i'm listening to cds and vinyls... The problem is that the preamp doesnt have an xlr balanced out so i will use an rca to xlr cable. I was just wondering what is your opinion about this configuration?
ilkka-rissanen, muokattu 9 Vuodet sitten.

Re: connecting valve preamp with genelec 7050b + 8030b

Yoda Viestejä: 2564 Liittymispäivä: 23.3.2009 Viimeisimmät viestit
Hi,

In fact I know quite many users who are using valve preamps with for example our 8260A speakers with great results. You should definitely try it! :)
bop-b-3akohe, muokattu 9 Vuodet sitten.

Re: connecting valve preamp with genelec 7050b + 8030b

Youngling Viestejä: 4 Liittymispäivä: 11.11.2009 Viimeisimmät viestit
Thank you very much for your answer..
digging about which preamplifier i should choose, I have come up with the following items since my budget is not that high and I dont want to spend much in a configuration that maybe wont fit my ears.. (since genelecs are so crystal clear and ultra analytical which is a thing I am not willing to lose)..
1. dared - sl 2000a with output impedance of 100ohms
2. dared - mc-7p with output impendance of 100ohms
3. xiang sheng 728a with output impedance of 600ohms but it has two strereo outputs one low output and one high output.
4. jolida jd5t with output impedance of 600ohms
From my search to the forum, which by the way has a wealth of knowledge, I have confirmed that the dareds are ok for the job..
but dont know certainly about the xiang sheng and jolida preamps.. what is your professional opinion?.. will 600ohms output impedance cause any distortion or other problems?