Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support


GLM 1.5.0 problem

mb-genelec, muokattu 9 Vuodet sitten.

GLM 1.5.0 problem

Youngling Viestejä: 10 Liittymispäivä: 21.5.2013 Viimeisimmät viestit
Dear Ilkka,
I updated to GLM 1.5.0. on MacMini/Maverick. Appears to be stable. However, if I want to start GLM via the setup file (either auto folder or manual), the loudspeaker network is not detected. I have to launch GLM manually (no network detection problem) and load the setup file. This has not been a problem with 1.4.x.
Thanks for comment/advice !
mb-genelec, muokattu 9 Vuodet sitten.

Re: GLM 1.5.0 problem

Youngling Viestejä: 10 Liittymispäivä: 21.5.2013 Viimeisimmät viestit
.... there are apparently some other problems. Volume presets do not go to the defined value x but apparently x-1 dB or x-0.5 dB :o The default value is then also changed... This occurs if one clicks on the "1", "2", etc. in the "preset level" field. Clicking on "1", "2", etc in the "level" field, provokes the same, i.e. volume goes to -49 dB if it should go to -50; however, the default value as such appears not to change.
Is there something like a bug report page ?
Regards, Michael

PS: The system is MacMini + 8260 in stereo; only using digital audio input; power mate and keyboard volume control.
ilkka-rissanen, muokattu 9 Vuodet sitten.

Re: GLM 1.5.0 problem

Yoda Viestejä: 2564 Liittymispäivä: 23.3.2009 Viimeisimmät viestit
Hi Michael,

Thank you for information, I have passed it on to our software development team. There is no separate bug report form but this thread/forum will do just fine.
dr-wu, muokattu 8 Vuodet sitten.

Re: GLM 1.5.0 problem

Youngling Viestejä: 6 Liittymispäivä: 11.5.2009 Viimeisimmät viestit
After updating to 1.5 my power mate does not work anymore. At first it was moving the volume slider in micro amounts for a couple of seconds and then it stopped completely.
Thats on a Macpro running the latest version of Mavericks.
:cry: :cry: