Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support


Setup Issue With 8030B & 5040B

steverido, muokattu 8 Vuodet sitten.

Setup Issue With 8030B & 5040B

Youngling Viestejä: 1 Liittymispäivä: 5.12.2012 Viimeisimmät viestit
I have had a set of Genelec 8300B's for a while now but wanted to have sound going to 35 Hz so I bought the 5040B.

I have sent the Front out L&R from the 5040B to the 8030B's and from the 8030B's as previous to my mixer. I have set the Bass roll off to the on position.

I am using Genelecs 85Hz test signal but the subwoofer is not making sound.

Am I doing something incorrect please?
ilkka-rissanen, muokattu 8 Vuodet sitten.

Re: Setup Issue With 8030B & 5040B

Yoda Viestejä: 2564 Liittymispäivä: 23.3.2009 Viimeisimmät viestit

This might be useful information!