Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Keskusteluryhmät

Inputs not working on my 5040A

jivemofo, muokattu 8 Vuodet sitten.

Inputs not working on my 5040A

Youngling Viestejä: 12 Liittymispäivä: 9.3.2014 Viimeisimmät viestit
Hello,
Strangely, one day two of the inputs on my 5040A stopped working. The rear input works but front and center do not. I do get some bass rumble from the source but that's it. I can't think of anything that changed...except that my housecleaner was vacuuming around it, but I can't imagine that could have done anything.

I normally have my laptop in one input along with a line running from a mixer to listen to records.

Any suggestions? I'm hoping there's a dumb solution that I just didn't think of...

Thank you in advance!
Tim
jivemofo, muokattu 8 Vuodet sitten.

Re: Inputs not working on my 5040A

Youngling Viestejä: 12 Liittymispäivä: 9.3.2014 Viimeisimmät viestit
Any thoughts on this? I forgot to mention...when I plug in the remote volume control no sound at all comes out. Very strange I know!
ilkka-rissanen, muokattu 8 Vuodet sitten.

Re: Inputs not working on my 5040A

Yoda Viestejä: 2564 Liittymispäivä: 23.3.2009 Viimeisimmät viestit
Which speakers do you have and how they are connected to the subwoofer? Inputs and outputs are linked together which means that if you have a source connected to the front L and R inputs, the speakers need to be connected to L and R outputs. Rear speaker outputs wouldn't produce any signal to the speakers and you would only hear the subwoofer rumble. Please check the connections.
jivemofo, muokattu 8 Vuodet sitten.

Re: Inputs not working on my 5040A

Youngling Viestejä: 12 Liittymispäivä: 9.3.2014 Viimeisimmät viestit
that did the trick. I knew it was something simple!
(now I'll have to fire the house maid for screwing with the connections)
:D