Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Keskusteluryhmät

re painting grills and AIW26 mount rods

natt, muokattu 8 Vuodet sitten.

re painting grills and AIW26 mount rods

Youngling Viestejä: 8 Liittymispäivä: 21.7.2012 Viimeisimmät viestit
Hello again,
well I'm now the proud owner of 7 AIW26s and 2 HTS4Bs.
What a system it will be when I finally install it all together.

1) Unfortunately the 4 of the sets of grills and frames for the AIW26s I have, have been painted black by a previous owner.
For the grills at least, should I strip these before painting so as not to add even more thickness to the grills?
They appear to have been spray painted and not too clogged up, but I fear going from black back to white, will take too much paint. Yes, I will carefully remove the mesh grill front before painting as I can see a foam layer behind it.

2) Where as I though I'd got all the mounting parts, I seem to be missing some sets of the square side mounting rods. I've asked my UK distributor for a quote, but my impatience is getting the better of me....do you even sell them after market, on their own or as part of a whole kit?

Thanks in advance

Nathan
ilkka-rissanen, muokattu 8 Vuodet sitten.

Re: re painting grills and AIW26 mount rods

Yoda Viestejä: 2564 Liittymispäivä: 23.3.2009 Viimeisimmät viestit
Hi there,

1) I would recommend stripping the old paint before applying a new one.

2) We don't have the mounting parts in our official spare part catalogue but we do sell them. They have to go through the distributor though. Part number for the mounting rod is 239-0002. Part number for the ledge which attach the rod to the enclosure is 239-0001. Price and availability information have to come from the distributor.