Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Keskusteluryhmät

F1/G1 volume control

arekusei, muokattu 9 Vuodet sitten.

F1/G1 volume control

Youngling Viestejä: 5 Liittymispäivä: 5.2.2014 Viimeisimmät viestit
I am looking to buy a F1/G1 combo. However, I would like to avoid F1's volume control since my DAC is better at it.

Is it possible? How do I do that?

Best regards,
Alexey
ilkka-rissanen, muokattu 9 Vuodet sitten.

Re: F1/G1 volume control

Yoda Viestejä: 2564 Liittymispäivä: 23.3.2009 Viimeisimmät viestit
I am looking to buy a F1/G1 combo. However, I would like to avoid F1's volume control since my DAC is better at it.

Is it possible? How do I do that?

Best regards,
Alexey

Hi,

You should just set it to maximum volume through the wireless volume control. Then it won't apply any attenuation.
arekusei, muokattu 9 Vuodet sitten.

Re: F1/G1 volume control

Youngling Viestejä: 5 Liittymispäivä: 5.2.2014 Viimeisimmät viestit
Thank you very much, just ordered my first Genelec system!

By the way, how is attenuation done in F1? Is it digital or analog?
ilkka-rissanen, muokattu 9 Vuodet sitten.

Re: F1/G1 volume control

Yoda Viestejä: 2564 Liittymispäivä: 23.3.2009 Viimeisimmät viestit
Thank you very much, just ordered my first Genelec system!

By the way, how is attenuation done in F1? Is it digital or analog?

It is done in digital domain.
arekusei, muokattu 9 Vuodet sitten.

Re: F1/G1 volume control

Youngling Viestejä: 5 Liittymispäivä: 5.2.2014 Viimeisimmät viestit
Thank you for clarification!

Is it a motorized pot? Or a resistor ladder?
ilkka-rissanen, muokattu 9 Vuodet sitten.

Re: F1/G1 volume control

Yoda Viestejä: 2564 Liittymispäivä: 23.3.2009 Viimeisimmät viestit
Thank you for clarification!

Is it a motorized pot? Or a resistor ladder?

Unfortunately we can not reveal more detailed information about our products.
arekusei, muokattu 9 Vuodet sitten.

Re: F1/G1 volume control

Youngling Viestejä: 5 Liittymispäivä: 5.2.2014 Viimeisimmät viestit
Thank you for clarification!

Is it a motorized pot? Or a resistor ladder?

Unfortunately we can not reveal more detailed information about our products.


No problem! I am OK with it as long as it does not introduce any noise and channel imbalance.