Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Keskusteluryhmät

8040A power consuming

kyokyo, muokattu 8 Vuodet sitten.

8040A power consuming

Youngling Viestejä: 3 Liittymispäivä: 19.10.2012 Viimeisimmät viestit
Hi,

I have a question about 8040A power consuming. When I turn on the monitors, does it consume the same amount of power, in louder or lower sound? When there is no signal, does it consuming full power amount 90 + 120W?

Thanks for anwer.

Thanks
kyo.
ilkka-rissanen, muokattu 8 Vuodet sitten.

Re: 8040A power consuming

Yoda Viestejä: 2564 Liittymispäivä: 23.3.2009 Viimeisimmät viestit
Hi,

The power consumption is related to the output level. At low output levels also the power consumption is low. Maximum power consumption for 8040A is 110 VA and idle (=no signal) power consumption is 10 VA.
kyokyo, muokattu 8 Vuodet sitten.

Re: 8040A power consuming

Youngling Viestejä: 3 Liittymispäivä: 19.10.2012 Viimeisimmät viestit
Really thank you.

What about 8050A, I also own a pair of them. And is the power consume related with the operating voltage?

Thanks
kyo
ilkka-rissanen, muokattu 8 Vuodet sitten.

Re: 8040A power consuming

Yoda Viestejä: 2564 Liittymispäivä: 23.3.2009 Viimeisimmät viestit
You can find this information for all of our speakers from each model's datasheet/operating manual. For 8050A it is 170 VA and 10 VA.