Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support


GLM Autocal Stuck on input calibration Windows 7

gholes, muokattu 9 Vuodet sitten.

GLM Autocal Stuck on input calibration Windows 7

Youngling Viestejä: 2 Liittymispäivä: 20.11.2013 Viimeisimmät viestit
Ok I'm at my wits end here, just don't understand why I don't get the frequency sweep like last time and why it gets stuck on input calibration. I have windows 7 64 bit, the GLM autocal USB soundcard. All the speakers register fine, my ZED R-16 is completely disconnected and all the equipment connects successfully. I hope i'm missing something simple here. Anyone with ideas would be greatly appreciated. :)
ilkka-rissanen, muokattu 9 Vuodet sitten.

Re: GLM Autocal Stuck on input calibration Windows 7

Yoda Viestejä: 2564 Liittymispäivä: 23.3.2009 Viimeisimmät viestit

Can you try with different computer? It does sound like a driver conflict issue.