Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Keskusteluryhmät

Replacement for 1029a

paulreso1, muokattu 9 Vuodet sitten.

Replacement for 1029a

Youngling Viestejä: 3 Liittymispäivä: 24.3.2013 Viimeisimmät viestit
Hi,
a new member posting....
I have had 1029a's in my home studio for 8 years & have got on well with them. I use these with Apogee Duet (1) and iMac. I am investing in a better Audio Interface and wanted to upgrade my monitors too. I need to keep the size small, but wanted to change to something a little smoother sounding that the 1029As - I don't want to use a sub, as I am in a semi-detached house and don't want to annoy the neighbours too much!

What would you suggest? My preference is to remain with small active monitors?

thanks in advance
Paul
digipete, muokattu 9 Vuodet sitten.

Move!

Padawan Viestejä: 99 Liittymispäivä: 18.6.2011 Viimeisimmät viestit
. . . or sound proof the shared wall!

Get yourself:

A set of 8260's, or
A set of 8240 + a 7260

And be in bliss!
ilkka-rissanen, muokattu 9 Vuodet sitten.

Re: Replacement for 1029a

Yoda Viestejä: 2564 Liittymispäivä: 23.3.2009 Viimeisimmät viestit
Hi Paul,

Since you are at Genelec forum, I would naturally recommend our 8030A monitor which is the direct replacement for the 1029A. :)

http://www.genelec.com/products/8030a/
paulreso1, muokattu 9 Vuodet sitten.

Re: Replacement for 1029a

Youngling Viestejä: 3 Liittymispäivä: 24.3.2013 Viimeisimmät viestit
Dear all,
Thanks for your replies. I want to confirm that the 80X0 series is a smoother sound than the 1029a sound ( which can be quite bright)?

Thanks
Paul
ilkka-rissanen, muokattu 9 Vuodet sitten.

Re: Replacement for 1029a

Yoda Viestejä: 2564 Liittymispäivä: 23.3.2009 Viimeisimmät viestit
Hi Paul,

Yes I can confirm that but of course you should have a demo first at your local dealer.
paulreso1, muokattu 9 Vuodet sitten.

Re: Replacement for 1029a

Youngling Viestejä: 3 Liittymispäivä: 24.3.2013 Viimeisimmät viestit
Hi, the 1029 s are front ported, so they are ok near to a wall, I think 80X0 series are rear ported....does this pose any issues with placement near a wall?
ilkka-rissanen, muokattu 9 Vuodet sitten.

Re: Replacement for 1029a

Yoda Viestejä: 2564 Liittymispäivä: 23.3.2009 Viimeisimmät viestit
Hi, the 1029 s are front ported, so they are ok near to a wall, I think 80X0 series are rear ported....does this pose any issues with placement near a wall?

Hi,

Our recommendation is to leave at least 5 cm distance between the wall and the port opening. So typically it won't pose any issues.