Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Keskusteluryhmät

HELP... Acoustic treatment and speaker settings

euginamusic, muokattu 5 Vuodet sitten.

HELP... Acoustic treatment and speaker settings

Youngling Viestejä: 1 Liittymispäivä: 9.2.2013 Viimeisimmät viestit
Hi everyone, i recently bought a set of genelec 8040's. Amazing speaker. My room is very small and my speakers sit in the corners. I treated the corners with bass traps (home made with 5inchs of fiberglass board) I also treated the early reflection points (side walls and ceiling) with acoustic foam.

Now that my rooms been fairly well treated acoustic wise what settings do i put my speakers onto?

When i first got my speakers the quick set up manual advised to me tune on the bass roll off 2, and bass tilt 2.

I have drawn a very rough sketch if that helps. Room size is 6 feet 2 inches by 10 feet 5 inches. Approx 8 feet ceiling height.

Thanks for in advance for any advise you can give :)
ilkka-rissanen, muokattu 9 Vuodet sitten.

Re: HELP... Acoustic treatment and speaker settings

Yoda Viestejä: 2564 Liittymispäivä: 23.3.2009 Viimeisimmät viestit
Hi,

In order to determine accurate room response settings, you will need to obtain acoustical frequency response measurement of your system. Otherwise it's impossible to give any definitive recommendations.

Other possibility is to tune it by ear, but that requires a set of very accurate ears and music that you have heard through a good (flat) system.
bharathranjith, muokattu 4 Vuodet sitten.

RE: Re: HELP... Acoustic treatment and speaker settings

Youngling Viestejä: 3 Liittymispäivä: 5.4.2018 Viimeisimmät viestit
For acoustic treatment, you can have information here: https://www.fabricacousticpanels.com/acoustic-treatment/. The acoustic treatment panel has been designed and tested in acoustics laboratory, so the sound absorption curves for each panel thickness are very predictable. The result is a series of products that can improve the acoustic performance of any public space.