Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Keskusteluryhmät

Problems with autocal and background noises.

ultimathunberg, muokattu 9 Vuodet sitten.

Problems with autocal and background noises.

Youngling Viestejä: 1 Liittymispäivä: 24.1.2013 Viimeisimmät viestit
Hi everyone.
Im trying to autocal my 8240a and having problems.
when its trying to autocal i get the message: "Background noise too high, Autocal cannot operate."
And in the information bar it says: "Background noise: Peak -2.4dB / RMS -11.4dB".
I have used my phones not so accurate decibel meeter and it says it is aproxamatly 35dB of constant noise in the room, and thats not too loud , is it?
We have used the autocal before with another computer in the same room and it worked great!

Im using the latest version of GLM on windows7.

Can anybody help me, whats wrong?

Best regards, Ludvig
ilkka-rissanen, muokattu 9 Vuodet sitten.

Re: Problems with autocal and background noises.

Yoda Viestejä: 2564 Liittymispäivä: 23.3.2009 Viimeisimmät viestit
Hi Ludvig,

Those numbers indicate that something is wrong with the equipment or the computer. Something in the system is generating a loud noise which is not real. Do you have access to another GLM microphone you could try? Or possibly another computer?