Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Keskusteluryhmät

How to connect the 6010a to my stereo reciver

terp, muokattu 10 Vuodet sitten.

How to connect the 6010a to my stereo reciver

Youngling Viestejä: 1 Liittymispäivä: 15.1.2013 Viimeisimmät viestit
Hello

so I have been planning to buy two Genelec 6010a speakers, But I am not sure if they can be connected to my stereo reciver. My stereo reciver is an Onkyo Tx-8555 Here is a link below:
http://www.us.onkyo.com/model.cfm?m=TX- ... ceiver&p=i

I read the Genelec user manual for the 6010as and it said that the speakers could be connected to a PRE OUT connecter on a home theatre reciver. My reciver also has the PRE OUT connector spots but because my reciver is not a home theatre reciver I am not sure if it will work. The PRE OUTS on my reciver might me amplified and the 6010a manual states that the speakers shuold never be connected to anything that amplifies because the speakers have their own amplifiers.

So basically my question is, how can I connect the 6010as to my stereo reciver?
las-vegas, muokattu 10 Vuodet sitten.

Re: How to connect the 6010a to my stereo reciver

Youngling Viestejä: 23 Liittymispäivä: 25.12.2011 Viimeisimmät viestit
Your receiver's Pre Outs will work fine. The Pre outs are not amplified.