Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Keskusteluryhmät

Connection 5040a and Presonus Audiobox usb

boroda, muokattu 5 Vuodet sitten.

Connection 5040a and Presonus Audiobox usb

Youngling Viestejä: 2 Liittymispäivä: 5.1.2013 Viimeisimmät viestit
Hi everyone, I have a sound card (Presonus Audiobox usb) and it 2 out balanced TRS, as it is properly connected 5040a:
or ?
ilkka-rissanen, muokattu 9 Vuodet sitten.

Re: Connection 5040a and Presonus Audiobox usb

Yoda Viestejä: 2564 Liittymispäivä: 23.3.2009 Viimeisimmät viestit
Hi,

Since you have only a stereo pair of speakers, you should connect only front L and R channels (both IN and OUT).
boroda, muokattu 9 Vuodet sitten.

Re: Connection 5040a and Presonus Audiobox usb

Youngling Viestejä: 2 Liittymispäivä: 5.1.2013 Viimeisimmät viestit
Thanks for the answer, and still more difficult question for me:
  I understand there are two types of connection through the main (2.1 two RCA to front L and R ) and through LFE(5.1)
If I connect through 2.1, the bass in my 6010a is 85 Hz, and if the 5.1, the bass will be from 120 Hz?
  And what if there is a subwoofer level ,it is a crossover for the regulation of main (2.1) at 35-85 Hz, or to compensate for the room?