Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Keskusteluryhmät

Genelec GLM with Crestron?

w3ua, muokattu 10 Vuodet sitten.

Genelec GLM with Crestron?

Youngling Viestejä: 2 Liittymispäivä: 22.12.2012 Viimeisimmät viestit
I plan to use set of Genelec DSP monitors (8260 for L&R, 8250 for Center, sides and rears, plus a couple of 7270 subs) in a 7.1 theater setup. Obviously, I will feed them with AES/EBU digital signals. Is it possible to control the volume of the system using Crestron automation? I understand that the volume can be controlled using GLM PC application -- but is it possible to do it without a PC? I definitely do not want to convert digital audio to analog just to control volume, then convert it back to digital to distribute the AES/EBU PCM streams to the speakers.
ilkka-rissanen, muokattu 10 Vuodet sitten.

Re: Genelec GLM with Crestron?

Yoda Viestejä: 2564 Liittymispäivä: 23.3.2009 Viimeisimmät viestit
Hello,

Unfortunately one can't directly connect to Genelec DSP speaker with external controllers like Crestron. But of course if your source has a volume control, you can control it with Crestron.
w3ua, muokattu 10 Vuodet sitten.

Re: Genelec GLM with Crestron?

Youngling Viestejä: 2 Liittymispäivä: 22.12.2012 Viimeisimmät viestit
Of course one can... if that one uses an embedded computer, which can receive Crestron commands and convert them into keystrokes, which control the GLM control interface through USB. I will try to build it myself using a small fanless pc and embedded Windows 7. It's a pity nobody did it yet...