Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Keskusteluryhmät

Genelec 1038 A flushmount small Dub stage

don-marco, muokattu 11 Vuodet sitten.

Genelec 1038 A flushmount small Dub stage

Youngling Viestejä: 1 Liittymispäivä: 9.11.2012 Viimeisimmät viestit
Hi all.

Im about to get my genelecs flush mounted in the wall and im looking for some guidelines
to Mount them....
There is gonna be a perforated screen in front of the speakers.

The plan is to build 3 mdf solid wood cases where the speakers will mount tight on hard rubber studs. and mount them in the wall... But shall I treat the "front" wall with something or should I leave it hard?
I have seen some wall mounts where the "front" wall was packed with insulation batts and then some kind of cloth..
This Shall be done like a dub stage and not like a music mix studio...

Sorry for my english I'll hope you know what I mean and can give me some advices.

All the best
Mark