Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Keskusteluryhmät

Molex ends for AIC25s

natt, muokattu 11 Vuodet sitten.

Molex ends for AIC25s

Youngling Viestejä: 8 Liittymispäivä: 21.7.2012 Viimeisimmät viestit
I've just purchased some used AIC25s.
Frustratingly, most of the molex adapters for the ends of speaker cables are missing.
There should be a 6 way connector for each of the amps and a 4 way for each of the speakers.
I have only 1 of the 4 way ones sent me. it looks like this...




Should have come here first, but that avforums is my usual haunt!

I've had a look around on RS components and could be a few hours at that. The only markings on it tell me it's made of PVC ;)

So how do I get hold of new ones please?
1038, muokattu 11 Vuodet sitten.

Re: Molex ends for AIC25s

Jedi Master Viestejä: 340 Liittymispäivä: 6.4.2009 Viimeisimmät viestit
Do a web search for "Pheonix" connectors, you should be able to find them in your local area in most electrical and hobby shops.
natt, muokattu 11 Vuodet sitten.

Re: Molex ends for AIC25s

Youngling Viestejä: 8 Liittymispäivä: 21.7.2012 Viimeisimmät viestit
Thanks Steve! (from the other side of the world, isn't the internet good)
Phoenix contacts they appear to be.
Terminal Blocks 4 way parallel rising clamp,5.08mm Phoenix Contact MSTB 2.5/ 4-ST-5.08
and
Terminal Blocks 6 way parallel rising clamp,5.08mm pitch Phoenix Contact MSTB 2.5/ 6-ST-5.08

or at least that's what I hope they are :D
1038, muokattu 11 Vuodet sitten.

Re: Molex ends for AIC25s

Jedi Master Viestejä: 340 Liittymispäivä: 6.4.2009 Viimeisimmät viestit
Sounds like you are in business NaTT, make sure to match the amp serial# to the speaker serial #, they are matched units calibrated from the factory..