Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support


5050A + 8030A + Yamaha Receiver

duff-man, muokattu 11 Vuodet sitten.

5050A + 8030A + Yamaha Receiver

Youngling Viestejä: 1 Liittymispäivä: 3.5.2012 Viimeisimmät viestit
Hi All,

So relatively new to the audio world. I have recently purchased a Yamaha RXV471 to accompany my 5050A and 2x 8030A monitors.....however, I am having a pretty hard time figuring out how they are come together.

My understanding is that receiver needs to support Pre Out (with it does) And that the 2 speakers plug into the back of the sub. Ive done this and while I can hear the subwoofer, the speakers are silent.

Am I missing something? :?
Thanks guys
ilkka-rissanen, muokattu 11 Vuodet sitten.

Re: 5050A + 8030A + Yamaha Receiver

Yoda Viestejä: 2564 Liittymispäivä: 23.3.2009 Viimeisimmät viestit

Yamaha RX-V471 has only preout for the subwoofer. In order it to work properly with a 2.1 system, you would need preouts also for the two main channels. ... _black__u/

Those are available on RX-V871 and RX-V 773. ... uct_lineup ... uct_lineup

The RX-V471 seem to have analog audio out for the main channels but those must be at fixed level (read: max level) so you would need to use a line level attenuator in between, for example Genelec 9000A.