Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Keskusteluryhmät

GLM SE v1.3 will not run AutoCal

john-f, muokattu 11 Vuodet sitten.

GLM SE v1.3 will not run AutoCal

Youngling Viestejä: 9 Liittymispäivä: 18.1.2012 Viimeisimmät viestit
I've read many threads and have tried what's suggested, but no luck. After using the Cabling Wizard successfully when I click the P button, GLM sits there running Input Calibration until I have to quit after many minutes. I've trashed all instances of GLM & tried reinstalling with the same results. I've tried X11 v2.6.3 and v2.7.1. That doesn't make a difference. GLM v1.2 worked the first time I tried AutoCal, but while it now gets through the room measurement audio sweeps, it never calculates the room response. I'm using an 8-core MacPro with Snow Leopard. Please help.
ilkka-rissanen, muokattu 11 Vuodet sitten.

Re: GLM SE v1.3 will not run AutoCal

Yoda Viestejä: 2564 Liittymispäivä: 23.3.2009 Viimeisimmät viestit
Hi John,

We found a bug in v1.3 which causes described symptoms in certain cases. Please download and install v1.3.1

http://www.community.genelec.com/software/downloads/
john-f, muokattu 11 Vuodet sitten.

Re: GLM SE v1.3 will not run AutoCal

Youngling Viestejä: 9 Liittymispäivä: 18.1.2012 Viimeisimmät viestit
Thanks for the link. I downloaded and install v1.3.1 and got through the room measurement portion, but when I clicked calculate it worked for 5 minutes with no result. When I restarted and tried a second time it wouldn't initiate the freq sweeps and sat there cycling on Input Calibration. Are there files in the Library somewhere from v1.2 or v1.3 that I should manually delete?
john-f, muokattu 6 Vuodet sitten.

Re: GLM SE v1.3 will not run AutoCal

Youngling Viestejä: 9 Liittymispäivä: 18.1.2012 Viimeisimmät viestit
I tried again and GLM SE crashed. I've attached the report.

Liitteet:

ilkka-rissanen, muokattu 11 Vuodet sitten.

Re: GLM SE v1.3 will not run AutoCal

Yoda Viestejä: 2564 Liittymispäivä: 23.3.2009 Viimeisimmät viestit
Please make sure you have X11 v2.6.3 installed, not v2.7.1.
john-f, muokattu 11 Vuodet sitten.

Re: GLM SE v1.3 will not run AutoCal

Youngling Viestejä: 9 Liittymispäivä: 18.1.2012 Viimeisimmät viestit
I have been using X11 v2.6.3. Does it start itself automatically or need I start it?
ilkka-rissanen, muokattu 11 Vuodet sitten.

Re: GLM SE v1.3 will not run AutoCal

Yoda Viestejä: 2564 Liittymispäivä: 23.3.2009 Viimeisimmät viestit
I have been using X11 v2.6.3. Does it start itself automatically or need I start it?

It starts automatically when AutoCal is being run.

If you are still having problems, could you send a log to our DSP developer team ( jussi.tikkanen (at) genelec.com ) ? Please open 'Console Log' program from Applications/Utilities folder. Then select 'All Messages' and save it 'File:Save a Copy As'.

Thank you!