Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support


Are 7050B 5.0 outputs buffered?

wohbaby, muokattu 10 Vuodet sitten.

Are 7050B 5.0 outputs buffered?

Youngling Viestejä: 1 Liittymispäivä: 10.11.2011 Viimeisimmät viestit
I am looking to buy a 8020 LSE Espresso (7050B + 5x 8020A) system. My analog sources are unbalanced, although I can trim them +6 dB to compensate. Cables to the sub will be <5 meters, but the cables from the subwoofer 5.0 outputs will be longer-- as much as 10 meters to the surround speakers.
My question is: Are the 7050B 5.0 outputs buffered, so they will convert the unbalanced input to balanced output, and thus get the reduced-noise benefit of balanced cabling to the satellite speakers?
ilkka-rissanen, muokattu 10 Vuodet sitten.

Re: Are 7050B 5.0 outputs buffered?

Yoda Viestejä: 2564 Liittymispäivä: 23.3.2009 Viimeisimmät viestit

The 7060B subwoofer and above have buffered outputs, the 7050B does not have.