Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support



thope, muokattu 5 Vuodet sitten.


Youngling Viestejä: 9 Liittymispäivä: 27.11.2011 Viimeisimmät viestit
Ok finally received my GLM package today and everything seemed to go according to plan.

A couple of questions though.. sorry if they've been answered elsewhere before.

I guess the software needs to be running in order for the autocal adjustments to take effect, right? So if i close they app then the speakers go back to un treated. Is there no way you could have the GLM app on your toolbar in Mac OS so you can easily see that its active. It would also be good to easily adjust the volume.

I have just moved into my new studio space and i haven't set the room up properly yet. There is very little thought put to acoustic treatment and one of the speakers is sort of in a corner.... but i wasn't expecting such massive adjustments by the autocal process..

is this normal

its the left speaker thats in the corner

ilkka-rissanen, muokattu 10 Vuodet sitten.

Re: autocal

Yoda Viestejä: 2564 Liittymispäivä: 23.3.2009 Viimeisimmät viestit

The GLM needs to be running if you want to change any of the settings including volume, but otherwise you can store the AutoCal settings into the speakers and close the software, even unhook the GLM network. In order to save the settings, two things need to be done.

1) Set the 1st dip of the second row to ON on every speaker. This ensures that the speaker uses the stored settings.

2) Go to Setup | Store acoustics settings to all online speakers.

For a simple volume adjustment solution, GLM supports Griffin Powermate external USB volume controller:

The AutoCal correction looks absolutely normal. You can view the original and corrected frequency response by clicking the "Interactive response editor".