Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Keskusteluryhmät

Dismantling 6040A for painting

d-squared, muokattu 10 Vuodet sitten.

Dismantling 6040A for painting

Youngling Viestejä: 1 Liittymispäivä: 17.1.2012 Viimeisimmät viestit
This may sound crazy to some but I have a grey/silver pair of 6040A's that i would like to have professionally painted to better match my home decor.
Can anyone offer any guidance on how best to take the cast aluminum enclosure apart for painting ?

Regards, Daniel.
1038, muokattu 10 Vuodet sitten.

Re: Dismantling 6040A for painting

Jedi Master Viestejä: 340 Liittymispäivä: 6.4.2009 Viimeisimmät viestit
Hi D,

It is a relatively easy job, just start at the bottom and work your way up. Everything is basically plug and play, make sure that the speakers have been disconnected from the power for a while, it is also a good idea to turn the power switch on with the speakers unplugged, this will ensure that the capacitors are drained.

The only problem you will encounter is trying to remove the bass driver grille, it is held in with silastic and is impossible to remove without damage.

I pulled a pair apart and painted them white for a trade show, after having problems with the first grille, i decided to leave the second one in and mask the grille up.

Good luck..