Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support


Pairing 1029a's with newer models?

jimmm, muokattu 12 Vuodet sitten.

Pairing 1029a's with newer models?

Youngling Viestejä: 1 Liittymispäivä: 16.5.2011 Viimeisimmät viestit
I have a studio using 1029a's and was wondering if I could combine 3 of them (Left, Center, Right) in a surround configuration with a newer Genelec model (Left Surround, Right Surround). Therefore, I would theoretically have 3 1029a's as L,C,R 1091a as sub, and a new model as surround L and R. Would this work? If so, what would you recommend?...THANKS!
ilkka-rissanen, muokattu 12 Vuodet sitten.

Re: Pairing 1029a's with newer models?

Yoda Viestejä: 2564 Liittymispäivä: 23.3.2009 Viimeisimmät viestit

For sure you can use newer models as surrounds. For example 8020B or 8030A would be a very good choice.